Appendix C Bgan Non-M2M Functions; To Control Data Connections From Web Interface (Bgan - COBHAM Satcom EXPLORER 540 User & Integrator's Manual

BGAN non-M2M functions
This appendix includes the features and functions in the EXPLORER 540 that are not availa-
ble with an M2M subscription, but only with a BGAN Class 2 subscription.
These functions are:
• Streaming
• VoIP
C.1 To control data connections from web interface
(BGAN)
The startup page of the web interface is used to start and stop data connections and to
set up the data connections.
If you are using the
Note
data connections.
The difference from the M2M version is, that Streaming connections are supported and
can be configured.
C.1.1 To start and stop data connections
The icons for starting
Note
the terminal is ready and registered on the BGAN network. Otherwise you
cannot start data connections.
To start and stop data connections on your EXPLORER 540, do as follows:
1. In the opening page, locate the connection package you want to start.
98-148232-K
Modem you cannot start and stop
EXPLORER 540 Cellular
 
and stopping
Appendix C
connections are only displayed if
C
C-1