COBHAM Satcom EXPLORER 540 User & Integrator's Manual page 82

4.8.2 To enable or disable the pointing sound
The EXPLORER 540 can make a sound to guide you through the pointing procedure
(default enabled). To enable or disable the pointing sound, do as follows:
1. In the Terminal settings page, locate the Audio indication section.
2. Select Audio assisted pointing if you want to use a pointing sound to assist your
pointing process.
3. At Audio assisted pointing volume (0 - 100) type the volume level you want for the
pointing sound.
4. Click Save.
4.8.3 To select the type of navigation system (GNSS)
To select which navigation system to use with your EXPLORER 540, do as follows:
1. In the Terminal settings page, locate the GNSS section (Global Navigation Satellite
System).
2. Select GPS, GLONASS, GPS and GLONASS or BeiDou.
3. Click Save. Note that it may take some minutes for the EXPLORER 540 to change the
navigation system.
4.8.4 To select the language
The default language of the web interface is English. You can change the language to
French, German, Russian, Spanish, Portuguese, Chinese or Japanese.
To change the language, do as follows:
1. In the Terminal settings page, locate the Language section.
2. Select a language from the list and click Save.
98-148232-K Chapter 4: Configuration with web interface
Terminal settings
4-18