COBHAM Satcom EXPLORER 540 User & Integrator's Manual page 140

Table of Contents

Advertisement

Event ID
Displayed text
(Hex)
Closing terminal
10206
due to high
temperature
Updating
10300
software...
Preparing for
10302
software update
Error opening
10303
software file
Software downgrade
10305
prevented. Use a
newer software
version.
File does not
10306
support this
product
File is corrupt.
10307
Download the file
again.
Software update
10308
failed. Try running
the update again.
Software update
10309
failed. Update to
the latest software
version.
Software failed.
1030A
Update to the
latest software
version from Safe
Mode.
98-148232-K
Explanation
Terminal has reached a
critically high temperature,
and will reboot by itself.
Software update has begun. Wait for the software
Initial preparations for
software upload are
started.
The file requested to use for
the update procedure
cannot be opened or found.
Not possible to perform a
software downgrade, use a
newer version.
The file used for software
update does not support
this product.
The file used for software
update appears to be
corrupt and the content
cannot be validated.
Software upload failed to
initialize, can be a sporadic
issue.
The software has been
rolled back to the previous
version prior to starting the
software upload. The new
image was not validated
correctly.
Not all subunits have been
properly verified with the
new image.
Chapter 5: Maintenance and troubleshooting
Troubleshooting
Remedy
Move the terminal to a
cooler location.
update to complete.
Wait until preparations are
over, either the terminal is
rebooted or an error is
shown.
Make sure the update file is
correct and the file exists.
Use the command
_IUPDFW? to show the
correct file name before
updating.
Use a newer version of
software for the update, or
contact your distributor.
Use the correct tiif file
Download the file again
Try running the update
again.
If the problem persists,
contact your distributor.
Try running the update
again, if the problem
persists, contact your
distributor.
Attempt software update
procedure again,
alternatively from Safe
Mode if the problem
persists.
5-13

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Satcom EXPLORER 540 and is the answer not in the manual?

Table of Contents