Omron CPM1 - PROGRAMING MANUAL 02-2001 Programming Manual page 438

Hide thumbs Also See for CPM1 - PROGRAMING MANUAL 02-2001:
Table of Contents

Advertisement

Data Movement Instructions
Description
Bi
1
MSB
Destination bit (00 to 15)
Flags
7-17-9 MOVE DIGIT – MOVD(83)
Limitations
Description
420
When the execution condition is OFF, MOVB(82) is not executed. When the
execution condition is ON, MOVB(82) copies the specified bit of S to the speci-
fied bit in D. The bits in S and D are specified by Bi. The rightmost two digits of Bi
designate the source bit; the leftmost two bits designate the destination bit.
Bi
2
0
1
LSB
S
Source bit (00 to 15)
D
ER:
Bi is not BCD, or it is specifying a non-existent bit (i.e., bit specification
must be between 00 and 15).
Indirectly addressed DM word is non-existent. (Content of *DM word is
not BCD, or the DM area boundary has been exceeded.)
Ladder Symbols
MOVD(83)
S
Di
D
The rightmost three digits of Di must each be between 0 and 3.
DM 6144 to DM 6655 cannot be used for Di or D.
When the execution condition is OFF, MOVD(83) is not executed. When the
execution condition is ON, MOVD(83) copies the content of the specified digit(s)
in S to the specified digit(s) in D. Up to four digits can be transferred at one time.
The first digit to be copied, the number of digits to be copied, and the first digit to
receive the copy are designated in Di as shown below. Digits from S will be co-
pied to consecutive digits in D starting from the designated first digit and contin-
ued for the designated number of digits. If the last digit is reached in either S or D,
further digits are used starting back at digit 0.
Digit number: 3 2 1 0
Bit
15
0 0 0 1 0 0 1 0 0 0 0 0 0 0 0 1
1
2
Bit
15
0 1 0 1 0 1 0 0 0 1 1 1 0 0 0 1
Bit
15
0 1 0 0 0 1 0 0 0 1 1 1 0 0 0 1
@MOVD(83)
S
Di
D
First digit in S (0 to 3)
Number of digits (0 to 3)
First digit in D (0 to 3)
Not used. (Set to 0.)
Section
Bit
00
0
1
Bit
00
Bit
00
Operand Data Areas
S: Source word
IR, SR, AR, DM, HR, TC, LR, #
Di: Digit designator (BCD)
IR, SR, AR, DM, HR, TC, LR, #
D: Destination word
IR, SR, AR, DM, HR, TC, LR
0: 1 digit
1: 2 digits
2: 3 digits
3: 4 digits
7-17

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CPM1 - PROGRAMING MANUAL 02-2001 and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents