Omron CPM1 - PROGRAMING MANUAL 02-2001 Programming Manual page 22

Application Precautions
Maintenance
Transportation and Storage
With the CPM1A-TS001/002, each of the input circuits is calibrated with
the cold junction compensator attached to the Unit. If the Unit is used with
the cold junction compensator from other Units, the Unit will not be able to
measure temperatures correctly.
With the CPM1A-TS001/002 or the CPM2C-TS001, do not touch the cold
junction compensator. Doing so may result in incorrect temperature mea-
surement.
When replacing a part, be sure to confirm that the rating of a new part is correct.
Not doing so may result in malfunction or burning.
When the CPU Unit is replaced, resume operation only after transferring to the
new CPU Unit the contents of the DM and HR Areas required for operation. Not
doing so may result in an unexpected operation.
When transporting the Units, use special packing boxes. Do not subject the
Units or other products to excessive vibration or shock during transportation
and do not to drop them.
Store the Units within the following temperature and humidity ranges:
Storage temperature:
Storage humidity:
–25 to 65 C
25% to 85% (with no icing or condensation)
5
xxiii