Omron CPM1 - PROGRAMING MANUAL 02-2001 Programming Manual page 10

About this Manual:
This manual provides information on programming the CPM1, CPM1A, CPM2A, CPM2C (including the
CPM2C-S), and SRM1(-V2) PCs. The following manuals describe the system configurations and installa-
tion of the PCs and provide a basic explanation of operating procedures for the Programming Consoles.
Read the relevant manual first to acquaint yourself with the PC.
Manual
CPM1 Operation Manual
CPM1A Operation Manual
CPM2A Operation Manual
CPM2C Operation Manual
CPM2C-S Operation Manual
SRM1(-V2) Operation Manual
Note 1. Version 2 (-V2) of the SRM1 is included beginning with following revision of the manual:
W318-E1-3.
2. Refer to sections on the CPM2C for information on CPM2C instructions and Expansion
Units.
For programming the CPM1, CPM1A, CPM2A, CPM2C (including the CPM2C-S), and SRM1(-V2) PCs,
use the CX-Programmer, special Support Software that runs in a Windows environment. The SYSMAC
Support Software and SYSMAC-CPT Support Software can also be used. Please refer to the relevant
manuals listed in the following table when using any one of Support Software.
Name
CX-Programmer version 3.1
CX-Programmer version 4.0
SYSMAC Support Software
SYSMAC-CPT Support Software
Please read this manual carefully and be sure you understand the information provided before attempting
to program or operate the PC.
Section 1 explains the PC Setup. The PC Setup can be used to control the operating parameters.
Section 2 explains special features of the PC.
Section 3 describes how to use the CPM1A-MAD01 and CPM2C-MAD11 Analog I/O Units, the CPM1A-
TSjjj and CPM2C-TSjjj Temperature Sensor Units, and the CPM1A-SRT21 and CPM2C-SRT21
CompoBus/S I/O Link Units.
! WARNING
Catalog No.
W262
W317
W352
W356
W377
W318
Model No.
WS02-CXPC1-EV3 CX-Programmer Operation Manual
WS02-CXPC1-EV4
C500-ZL3AT1-E
WS02-CPTB1-E
Failure to read and understand the information provided in this manual may result in
personal injury or death, damage to the product, or product failure. Please read each
section in its entirety and be sure you understand the information provided in the section
and related sections before attempting any of the procedures or operations given.
Manual
g p
SYSMAC Support Software
Operation Manual: Basic
SYSMAC Support Software
Operation Manual: C-series PCs
SYSMAC-CPT Support Software Quick
Start Guide
SYSMAC-CPT Support Software
User Manual
Catalog
No.
W414
W425
W247
W248
W332
W333
xi