z Wrap reverse direction absolute positioning
Positioning operation in the reverse direction is performed to the target position within the wrap range. In the Target
position (607Ah), set the target position within the wrap range. Refer to p.122 for the wrap function.
Example: When moving from the command position "1,000" to the target position "4,000" (wrap
setting range: 1.0 rev, wrap offset ratio: 50.00 %)
Set the items in the table to start wrap reverse direction absolute positioning operation.
Index
41C7h
Wrap (RND) setting
41C9h
Initial coordinate generation & wrap setting range [1=0.1 rev]
41CBh
Initial coordinate generation & wrap range offset ratio [1=0.01 %]
414Fh
Wrap positioning mode
607Ah
Target position [step]
Home
0
−2,500
−5,000
Name
Present position
1,000
Setting of Target position (607Ah)=4,000
Actual travel amount=−7,000
2,500
4,000
Target position
Drive profile
Setting value
1: Enable
10
5,000
3: Wrap reverse direction
4,000
99