Orientalmotor AZX Series Operating Manual page 179

z Cumulative load 0 information (INFO-CULD0) (41B1h)
Sets the condition under which the information is generated.
Index Sub Type Access
41B1h 00h INT32 RW
z Cumulative load 1 information (INFO-CULD1) (41B2h)
Sets the condition under which the information is generated.
Index Sub Type Access
41B2h 00h INT32 RW
z Cumulative load value auto clear (41B3h)
Clears the cumulative load when operation is started (at the ON edge of the MOVE output).
Index Sub Type Access
41B3h 00h U8 RW
z Cumulative load value count divisor (41B4h)
Sets the divisor of the cumulative load.
Index Sub Type Access
41B4h 00h U16 RW
z Settling time information (INFO-STLTIME) (41B5h)
Sets the condition under which the information is generated.
Index Sub Type Access
41B5h 00h U16 RW
z INFO-USRIO output selection (41BCh)
Selects the output signal to be checked by the INFO-USRIO output.
Index Sub Type Access
41BCh 00h U8 RW
z INFO-USRIO output inversion (41BDh)
Sets the ON-OFF status of the INFO-USRIO output.
Index Sub Type Access
41BDh 00h U8 RW
z Information LED condition (41BEh)
Sets the LED status when information is generated.
Index Sub Type Access
41BEh 00h U8 RW
z Information auto clear (41BFh)
When the cause of information is eliminated, the INFO output and the bit output of the corresponding information
are turned OFF automatically.
Index Sub Type Access
41BFh 00h U8 RW
PDO Save Initial value
RxPDO 0

PDO Save Initial value
RxPDO 0

PDO Save Initial value
No 1

PDO Save Initial value
No 1

PDO Save Initial value
RxPDO 0

PDO Save Initial value
No 128

PDO Save Initial value
No 0

PDO Save Initial value
No 1

PDO Save Initial value
No 1

Objects of manufacturer-specific area
Range Update
0 to 2,147,483,647 A
Range Update
0 to 2,147,483,647 A
Range Update
0: Does not clear
A
1: Clear
Range Update
1 to 32,767 A
Range Update
0: Disable
A
1 to 10,000 ms
Range
_
Output signals list p.130
Range Update
0: Non invert
A
1: Invert
Range Update
0: The LED does not blink
1: The LED blinks
Range
0: Disable (not turned OFF automatically)
1: Enable (turned OFF automatically)
Update
A
A
Update
A
179