Orientalmotor AZX Series Operating Manual page 119

„ Details of touch probe function
The action of the touch probe is set with the Touch probe function (60B8h).
Set the action of the touch probe 1 in the lower 8 bits and that of the touch probe 2 in the upper 8 bits.
Set the trigger condition using the Touch probe 1 trigger action / Touch probe 2 trigger action (bit 1 / bit 9) and the
Touch probe 1 trigger selection / Touch probe 2 trigger selection (bit 2 / bit 10). After that, changing the Touch probe
1 permission / Touch probe 2 permission (bit 0 / bit 8) from 0 to 1 latches according to the set trigger condition.
Be sure to change the Touch probe 1 permission / Touch probe 2 permission (bit 0 / bit 8) back to 0 before changing
the trigger condition. Changing the trigger condition while the Touch probe 1 permission / Touch probe 2 permission
(bit 0 / bit 8) remains 1 will not be enabled.
Bit Name
0 Touch probe 1 permission
1 Touch probe 1 trigger action
2 Touch probe 1 trigger selection
3 Reserved
4 Touch probe 1 positive value action
Touch probe 1 negative value
5
action
6 Reserved
7 Reserved
8 Touch probe 2 permission
9 Touch probe 2 trigger action
10 Touch probe 2 trigger selection
11 Reserved
12 Touch probe 2 positive value action
Touch probe 2 negative value
13
action
14 Reserved
15 Reserved
Value
0 Disables the touch probe 1.
1 Enables the touch probe 1.
First trigger action
0
Latches only once on the first trigger.
Continuous action
1
Latches every time a trigger is input.
0 Sets the external latch input EXT1 as a trigger.
1 Sets the ZSG output as a trigger.
0 Reserved
0 Disables the latch function on the positive value of a trigger.
1 Enables the latch function on the positive value of a trigger.
0 Disables the latch function on the negative value of a trigger.
1 Enables the latch function on the negative value of a trigger.
0 Reserved
0 Reserved
0 Disables the touch probe 2.
1 Enables the touch probe 2.
First trigger action
0
Latches only once on the first trigger.
Continuous action
1
Latches every time a trigger is input.
0 Sets the external latch input EXT2 as a trigger.
1 Sets the ZSG output as a trigger.
0 Reserved
0 Disables the latch function on the positive value of a trigger.
1 Enables the latch function on the positive value of a trigger.
0 Disables the latch function on the negative value of a trigger.
1 Enables the latch function on the negative value of a trigger.
0 Reserved
0 Reserved
Functions
Description
119