Orientalmotor AZX Series Operating Manual page 76

„ Setting of data and parameters
Data and parameters described in "5 EtherCAT communication" can be set using the MEXE02 software in addition to
EtherCAT.
„ Notation rules
z Timing of the update
When a parameter is changed, the timing for updating the new value varies depending on the parameter.
In this part, each update timing is represented in an alphabet.
Notation
A Recalculation and setup are immediately executed when the parameter is written.
B Recalculation and setup are executed when the operation is stopped.
Recalculation and setup are executed after Configuration is executed or Write batch NV memory is
C
executed to turn on the control power supply again.
Recalculation and setup are executed after Write batch NV memory is executed to turn on the control
D
power supply again.
76
Description