Orientalmotor AZX Series Operating Manual page 195

z User output (USR-OUT) source B function (4964h, 4965h)
Sets the output source B of USR-OUT.
Index Sub
User output (USR-OUT0)
4964h 00h
source B function
User output (USR-OUT1)
4965h 00h
source B function
z User output (USR-OUT) source B inverting mode (4966h, 4967h)
Changes the ON/OFF setting of the output source B of USR-OUT.
Index Sub
User output (USR-OUT0)
4966h 00h
source B inverting mode
User output (USR-OUT1)
4967h 00h
source B inverting mode
z User output (USR-OUT) logical operation (4968h, 4969h)
Sets the logical combination of the user output sources A and B of USR-OUT.
Index Sub
User output (USR-OUT0)
4968h 00h
logical operation
User output (USR-OUT1)
4969h 00h
logical operation
z Extended input (EXT-IN) function (4970h)
Selects an input signal to be assigned to the HOME PRESET switch.
Index Sub Type Access
4970h 00h U8 RW
z Extended input (EXT-IN) inverting mode (4971h)
Changes the ON-OFF setting of the input signal to be assigned to the HOME PRESET switch.
Index Sub Type Access
4971h 00h U8 RW
z Extended input (EXT-IN) interlock releasing time (4972h)
Normally, the HOME PRESET switch is interlocked. Pressing and holding the switch for a certain amount of time will
release the interlock and enable the assigned function. This parameter is used to set the amount of time that the
switch must be pressed and held down in order to release the interlock.
Index Sub Type Access
4972h 00h INT8 RW
z Extended input (EXT-IN) interlock releasing duration (4973h)
Sets the amount of time that the state of releasing the interlock is maintained.
Index Sub Type Access
4973h 00h INT8 RW
z Extended input (EXT-IN) ON monitor time (4974h)
When a signal assigned to the switch is input, the LED is lit. This parameter is used to set the amount of time that the
LED is lit.
Index Sub Type Access
4974h 00h INT8 RW
Name Type Access
U8 RW
U8 RW
Name Type Access
U8 RW
U8 RW
Name Type Access
U8 RW
U8 RW
PDO Save Initial value
No 9

PDO Save Initial value
No 0

PDO Save Initial value
No 10

PDO Save Initial value
No 30

PDO Save Initial value
No 10

Objects of manufacturer-specific area
PDO Save Initial value
No 128

No 128

PDO Save Initial value
No 0

No 0

PDO Save Initial value
No 1

No 1

Range
_
Input signals list p.129
Range Update
0: Non invert
C
1: Invert
Range Update
0: Disable
A
1 to 50 (1=0.1 s)
Range Update
0 to 50 (1=0.1 s) A
Range Update
0 to 50 (1=0.1 s) A
Range Update
C
Output signals list
_
p.130
C
Range Update
C
0: Non invert
1: Invert
C
Range Update
C
0: AND
1: OR
C
Update
C
195