Orientalmotor AZX Series Operating Manual page 45

CLR input
READY output
MOVE output
Motor excitation
Non-excitation
Electromagnetic brake
Internal speed command
* It varies depending on the driving condition.
z STOP input
Turning the STOP input ON will stop the operation according to the setting of the "STOP input action" parameter.
When the operation is stopped, the remaining travel amount is cleared.
Related parameter
MEXE02
Name
code
p5 STOP input action
When the STOP input action is set to "Deceleration stop"
(when the motor stops while the STOP input is ON)
1. When the STOP input is turned ON during operation, the motor starts the stopping movement.
2. When the STOP input is turned OFF, the READY output is turned ON.
STOP input
READY output
MOVE output
Internal speed command
Motor excitation
Non-excitation
Electromagnetic brake
2 ms or more
ON
OFF
ON
OFF
2 ms or less
ON
OFF
Excitation
Hold
Release
*
Description
Sets how to stop the motor when the STOP
input is turned ON.
ON 1
OFF
ON
OFF
ON
OFF
Excitation
Hold
Release
2 ms or less
Setting range
0: Immediate stop
3: Deceleration stop
2
Input signals
Initial value
3
45