Maintenance
4) Inspection of Cooling Water Passage
1.
Check cooling water intake for clog. Clean if necessary.
2.
Set lower unit in the water and start engine.
3.
Check that cooling water check port 2 ejects water.
6. Operating System
1) Adjustment of Throttle Cable
(for Tiller handle model)
1.
Remove throttle cable 1 from throttle cable bracket 2.
2.
Adjust left cable length so that the advancer arm 3 is
touched to full open stopper 4 when throttle full open
position, then temporary tighten the lock nut.
3-12
1
2
1
1
TLD D30/40/50B2 2013
2
2
4
3