TOHATSU MD 30B2 Service Manual page 142

Power Unit
3) Assembly of Crank Case Head
1. Apply grease and oil to oil seal 19.6-35-10 1 and press-fit
it to crank case head.
2. Apply grease and oil to oil seal 35-589 2 and press-fit it to
crank case head.
LIT
LIT
2st OIL
2st
4) Removing Air Compressor
Refer to "Removing Air Compressor" in chapter 4.
5) Removing Flywheel
1. Attach flywheel puller kit to flywheel, then loosen flywheel
nut and remove it.
Flywheel Puller Kit :
P/N. 3T1-72211-0
• Use M8-20 bolts. (3 pieces.)
• Turn magneto nut clockwise.
2. Remove flywheel by using flywheel puller kit and flywheel
center plate.
Turn center bolt clockwise to remove flywheel.
3. Remove magneto key.
5-20
LIT 2st
LIT 2st OIL
1
LIT
LIT
2st
2st OIL
2
TLD D30/40/50B2 2013