TOHATSU MD 30B2 Service Manual page 115

7) Assembly of Compressor Housing
1. Apply two stroke engine oil to periphery of bearing 3, and
install it into compressor housing by using a press.
Driver Rod 1 :
P/N. 3AC-99702-0
Bearing Attachment 2 :
P/N. 3T1-99905-0
• Do not reuse removed bearing.
• Install bearing with manufacturer's mark facing
bearing driving tool.
2st OIL
2st
2. Apply two stroke engine oil to periphery of oil seal 5,
lithium grease to the lip area, and install it into compressor
housing by using a press.
Driver Rod 1 :
P/N. 3AC-99702-0
Oil Seal Attachment 4 :
P/N. 3T1-99820-0
Be careful of orientation of oil seal when it is
installed.
2st OIL
2st
LIT
LIT
TLD D30/40/50B2 2013
1
2
3 Bearing
Do not reuse
1
2
3 Bearing
Do not reuse
1
4
5 Oil seal
Do not reuse
3
2st
2st OIL
3
2st
2st OIL
4
5
2st
LIT
2st OIL
LIT
4-35