TOHATSU MD 30B2 Service Manual page 273

21) Assembling PTT Motor Parts
1. Connect PTT motor leads and secure them with screws.
2. Put brushes 1 into brush holders, and attach armature 2.
3. Install stator to base.
Cover armature shaft end with clean cloth,
hold the shaft using a pair of pliers, and install
armature to stator carefully.
22) Removing PTT Pump and Valves
1. Remove manual valve 1 and filter 2 then PTT pump ass'y
3.
2. Remove valve assy's 5 and releaf valve ass'y 6 from PTT
unit 4.
Be careful not to lose removed parts which are
small.
TLD D30/40/50B2 2013
1
6
5
4
2
7
2
3
1
7-43