Power Unit
45) Installing Solenoid Bracket
1.
Install fuse holder plate, cord clamp and rubber mount.
Set cord clamp angle to 15 degree.
2.
Install starter solenoid, PTT solenoid and fuse holder to
solenoid bracket.
• Pass the Red wire (fuse holder +), Ground wire
(PTT solenoid -) and Green wire into the center
hole of solenoid bracket.
• Refer to "Electric Circuit"
5-54
Rubber mount
(up down)
Fuse holder late
Collar
Cable clamp
TLD D30/40/50B2 2013