TOHATSU MD 30B2 Service Manual page 351

2) Drag Link
1. Attach drag link as shown.
When installing steering rod that connects
engine and steering cable, be sure to use
special bolt 1,split pin 2 and nylon lock nuts 3.
Do not use regular bolts and non-lock type nuts
in place of these bolts and lock nuts, or the nuts
may be loosened due to mechanical vibration
resulting in disconnection of the link rod.
Disconnection of steering rod will cause
the boat to turn accidentally. The sudden
turn of the boat may cause the passenger
to be thrown overboard, leading to serious
injury or fatal accident.
Bolt 1 :
27 N · m (20 lb · ft) [2.7 kgf · m]
Nylon Nuts 2 :
Fully tighten, and then loosen 1/4 of a turn.
Washer 3
Coller 4
TLD D30/40/50B2 2013
WARNING
2
1
3
4
3
1
3
2
10
10-9