Removing Ignition Coils
1.
Loosen mounting bolt of ignition coils #1, #2 and #3, and
remove the coils.
Removing Rectifier
1.
Loosen two rectifier mounting bolts and remove the unit.
Removing Crank Position Sensor
1.
Loosen two mounting bolts and remove the crank position
sensor.
10) Removing Oil Pump
1.
Remove oil pump securing bolts (M6, 2 pcs.), and then,
remove pump together with pump bracket.
• Disconnect oil hose from crank case.
Refer to "Oil System" in Chapter 4.
• Use waste cloth to let it soak with oil if spilt from
hose.
2.
Remove bushing 1 and oil pump driven gear 2.
TLD D30/40/50B2 2013
2
2
1
1
5-25
5