TOHATSU MD 30B2 Service Manual page 141

15. Loosen outside engine mount bolts first and then remove
all of them.
16. Hoist power unit by using eye bolt y.
• Set eye bolt installation hole a illustration shown
and Install eye bolt to cylinder head side.
• Hoist power unit taking care not to catch wires
and hoses.
Eye Bolt y :
P/N. 3T9-72212-0
17. Remove 2-crank case bolts. Remove crank case head u.
Put the tip of bladed screw driver in the mating
face of crank case head as shown to separate
from the engine body evenly.
TLD D30/40/50B2 2013
y
a
u u
5
5-19