TOHATSU MD 30B2 Service Manual page 256

Cowl, Bracket and PTT Unit
6) Disassembly of Drive Shaft Housing
1. Loosen upper mount lubber cap mounting bolts 1, and
remove it.
2. Remove engine base bolts 2.
3. Tap lightly with a plastic hammer to separate engine base
from the housing if it is seized.
If necessary, use a bladed screw driver to pry the
engine base taking care not to scratch mating
surface.
4. When removing drive shaft housing, be careful not to lose
dowel pin 4 for locating engine base.
5. Loosen and remove bolts 5 that secure exhaust housing
4 to engine base and remove exhaust housing.
7-26
2 2
1 1
1 1
1 1
4
2 2
2
3
4
5
TLD D30/40/50B2 2013