TOHATSU MD 30B2 Service Manual page 108

Fuel System (TLDI)
10) Assembly of FFP Ass'y
Assemble following parts.
1. Attach hose joint adapter 1 and metal washer 2 to upper
case 3.
Hose Joint Adapter 1 :
1.5 N·m (11 lb·ft) [1.5 kgf·m]
Degrease edge and then apply adhesive :
ThreeBond 1342
1342 1342
Replace metal washer 2 with new one if FFP is
disassembled.
2. Attach pipe grommet 4 and lower grommet 5 to FFP 6.
Pipe Grommet 4, Lower Grommet 5 :
Genuine Engine Oil
2st
3. Install FFP 6 to case 7.
To avoid the use of FFP 6 on another
model, check the marking a on the body,
before assembly.
For TLDI40/50B, TLDI40/50B2,
TLDI70/90B and TLDI90C : "GSC434"
For TLDI75/90C2, TLDI115A and TLDI115A2 :
"GSC295"
• Adjust position of FFP body so that pipe grommet
4 can be inserted into upper case 3.
• Lightly applying 2 stroke engine oil on inside and
outside of pipe grommet 4 makes adjustment of
position of FFP body easier.
• Installation orientation of 6 to 7 is as shown.
Put upper case 3 on the top and check the
position.
• Install upper case taking care that motor leads
are not caught between upper case and FFP
body.
4-28
CAUTION
1
2
4
a
7 7
4 4
1342 1342
1342
3
8
2st
2st OIL
6
5
2st
2st OIL
7
6 6
8 8
TLD D30/40/50B2 2013