TOHATSU MD 30B2 Service Manual page 356

Rigging
r/min
6. Electric System
1) Battery Capacity
12V100 AH or more
CCA : 850
MCA : 1100
2) Connection of Battery Cables
1. Single Outboard Installation
1 : Red Sleeve (Positive Side)
2 : Black Sleeve (Negative Side)
3 : Starting Battery
2. Twin Outboard Installation
Be sure to connect negative terminals of the starting
batteries by using common earth lead 4 of which size is
equal to that of the main battery cables.
3) Installation of Battery (ies)
This outboard motor cannot be operated without using battery.
Use battery of 12V.100AH (12V.120AH for use in cold areas)
1. Battery should be stored in battery storage box and
secured to hull to prevent it from falling due to rolling or
pitching or any shock in the place where it is protected
from water spray.
2. When connecting battery cables, connect red cable
first, and then black one. (Reverse the order when
disconnecting.)
Positive cable is the one with red tube on the terminal end.
· Before using battery, thoroughly read
warning label.
· Do not disconnect battery cable during
engine operation.
10-14
12V120 AH or more (in cold regions)
CCA : 1000
MCA : 1500
CAUTION
2
1
3
4
Battery Cable
(Red)
Battery Cable
(Black)
TLD D30/40/50B2 2013