TOHATSU MD 30B2 Service Manual page 154
Hide thumbs
Also See for MD 30B2:
- Owner's manual (400 pages) ,
- Product manual (400 pages) ,
- Owner's manual (96 pages)
Table of Contents
Advertisement
Power Unit
20) Removing Exhaust Cover
1.
Loosen exhaust cover mounting bolts in the order shown,
remove them, and remove exhaust cover.
Loosen the bolts in descending order of the
numbers embossed on the exhaust cover.
• Pry the gap of the cover at five grooves one by
one by using a bladed screw driver.
• The cover can be removed easier if parts
cleaning agent is applied in the gap one by one
from the top one.
• Be careful to pry the gap evenly, or the cover
may be damaged or warped.
21) Inspection of Exhaust Cover
1.
Check the removed outer exhaust cover and inner exhaust
cover for damages such as distortion or scratches on their
mating surface.
Remove clogs and debris from cooling water
passage of exhaust cover.
5-32
TLD D30/40/50B2 2013
Advertisement
Table of Contents
