Cowl, Bracket and PTT Unit
7.
Reverse connection of PTT motor lead wires to battery
terminals to fully stretch tilt rod.
T t Rod
Stretch
• Repeat above steps several times to move up
and down tilt rod (When reversing motor lead
wire connection, keep the connection open for
two or three seconds.).
• If tilt rod does not move smoothly when
connected to battery, assist the movement with
hand.
8.
Check fluid level with tilt rod fully stretched. Add
recommended PTT fluid to specified level if it is lacking.
Recommended PTT Fluid :
ATF DEXRON III
OIL
7-48
PTT Motor Lead Wires
Battery Term na s
B ue (L)
+ : Pos t ve Term na
Green (G)
– : Negative Terminal
L
G
TLD D30/40/50B2 2013