TOHATSU MD 30B2 Service Manual page 174

Power Unit
2. Install new O-ring to oil pump ass'y, then cylinder ass'y.
• Align slot of oil pump drive gear and drive shaft.
• Reconnect oil hose to crankcase. "Refer to Oil
System diagram" in Chapter 4.
• Use waste cloth to let it soak with oil if spilled from
hose.
Oil pump bolts :
6 N · m (4 lb · ft) [0.6 kgf · m]
41) Installation of Throttle Body
1. Install throttle body, then tighten bolts (M6) to specified
torque.
When reusing bolts, apply screw lock #1342.
Throttle Body Bolts (M6) :
9 N · m (7 lb · ft) [0.9 kgf · m]
1342
1342 1342
5-52
1342 1342
1342 1342
TLD D30/40/50B2 2013