TOHATSU MD 30B2 Service Manual page 122

Fuel System (TLDI)
4) Air Bleeding
Be sure to clean up any oil spills by waste
textile.
1. Visually check if any air is found in the oil line from oil tank
to cylinder block, and if any air is found, bleed the air by
using the following procedure.
2. Fill oil tank.
3. Loosen the air breading screw 1 and flows oil from the
inlet pipe 2 when containing no air bubble flows out.
Tighten screw when containing no air bubbles.
å From Oil Filter
4-42
CAUTION
1
å
2
TLD D30/40/50B2 2013