TOHATSU MD 30B2 Service Manual page 267

15) Assembling Clamp Bracket
1. Apply grease to swivel bracket, swivel bracket shaft,
bushing.
å : PTT/ Gas assist model
∫ : Manual tilt model
Manual Tilt Model Only
2. Put bushing to swivel bracket, and then, insert swivel
bracket shaft 1 into clamp bracket 2 and tilt assistant
spring 3.
Set the tilt stop lever to "Release" position, then
install swivel bracket shaft and assistant spring.
*Tilt assistant spring 3 is discontinuing products for after January in 2012
3. Install tilt assistant shaft 4.
4. Tighten nylon nut 5 to the specified torque.
Nylon Nut 5 :
25 N · m (18 lb · ft) [2.5 kgf · m]
TLD D30/40/50B2 2013
å
OBM OBM
OBM
∫
OBM OBM
OBM
3 3
4 4
5 5
OBM OBM
OBM
OBM OBM
OBM
2 2
1 1
7 7
7-37