TOHATSU MD 30B2 Service Manual page 175

• Apply LIT grease to sliding faces of throttle cam
and roller.
• Apply ThreeBond 1342 to throttle body securing
bolts.
LIT
LIT
1342
1342 1342
2. Attach air chamber cover and gasket. Attach and tighten
air chamber securing bolts (M6)
torque in the order of the numbers shown.
Air Chamber Cover Bolts :
6 N · m (4 lb · ft) [0.6 kgf · m]
42) Installation of Throttle Link
Reverse throttle link removing procedure described in
"Removing Throttle Link" in Chapter 5.
43) Installation of Fuel System
Refer to "Removing and Installation of Fuel System" in
Chapter 4.
44) Installation of Air Compressor
Refer to "Removing and Installation of Air Compressor" in
Chapter 4.
TLD D30/40/50B2 2013
to to specified
1
8
1342
1342
LIT
LIT
5
5-53