TOHATSU MD 30B2 Service Manual page 217

D30/40/50
Shimming Gauge 3 :
P/N. 3C8-72250-0
Thickness Gauge :
P/N. 353-72251-0
3. Add shim 6 to bottom of b pump case (lower) to adjust
the gap a to specified value.
D30/40/50
Pinion (B) Gear Height a :
0.60 - 0.64 mm (0.0236 - 0.0252 in)
Type of Shims 6 Applicable :
0.1 mm (0.0039 in) P/N. 345-64081-0
0.15 mm (0.0059 in) P/N. 345-64082-0
0.3 mm (0.0118 in) P/N. 345-64083-0
0.5 mm (0.0197 in) P/N. 345-64084-0
TLD D30/40/50B2 2013
WD50
Shimming Gauge 3 :
P/N. 353-72250-0
Thickness Gauge :
P/N. 353-72251-0
b
6
WD50
Pinion (B) Gear Height a :
0.95 - 1.00 mm (0.03740 - 0.03937 in)
Type of Shims 6 Applicable :
0.1 mm (0.0039 in) P/N. 353-64081-0
0.15 mm (0.0059 in) P/N. 353-64082-0
0.3 mm (0.0118 in) P/N. 353-64083-0
a
3
6
6-39