TOHATSU MD 30B2 Service Manual page 99

4. Loosen two bolts 9 that secure air rail, and remove air rail
ass'y 0 carefully.
5. When removing the air rail, leave the air injectors on the
cylinder side.
Be careful not to drop O ring located on the air
injectors.
Pull the air rail straight without applying force to
the air injectors.
6. After removing air rail ass'y, remove three air injectors q
and air injector set pieces 0.
Handle air injectors carefully. Impacting
their tips can cause malfunction.
When removing the air injectors, pull out them
straight without applying force to their tips.
7. Turn each fuel injector carefully to loosen O ring, and
insert bladed screw drivers from both sides to remove it up
straight evenly.
Handle fuel injectors carefully. Impacting
their tips can cause malfunction.
TLD D30/40/50B2 2013
CAUTION
CAUTION
9 9
0 0
9 9
w
q
4
4-19