TOHATSU MD 30B2 Service Manual page 271

19) Disassembling PTT Motor
1. Remove bolt 1, and then remove stator 2.
Cover armature shaft end with clean cloth,
hold the shaft using a pair of pliers, and
remove armature 3 from stator carefully.
2. Remove armature 3 from PTT motor base.
Do not apply grease or oil to commutator.
3. Disconnect PTT motor lead wire 4.
4. Remove screw 5, disconnect PTT motor lead 6, and
then, remove brushes 7.
· Do not disconnect PTT motor lead from
stator.
· Do not touch bi-metal a. Doing so affects
operation of circuit breaker.
TLD D30/40/50B2 2013
CAUTION
3
4 4
6
5
5
7
1
2
3
7
6
a
7-41