TOHATSU MD 30B2 Service Manual page 149

12) Inspection of Throttle Body
1. Check throttle body for wear of throttle cam and cam roller,
and check if throttle cam and roller move smoothly.
Do not move adjust screw located on the upper
part of throttle body.
13) Removing Air Chamber
1. Loosen air chamber cover mounting bolts in the order
shown, remove them, and remove air chamber cover.
• Disconnect recirculation hose. Refer to
"Recirculation System" in Chapter 4.
• When air chamber cover is removed, the oil
collected in the cover may flow out. Use rag to
catch the oil.
2. Loosen throttle body mounting bolt and remove the throttle
body.
TLD D30/40/50B2 2013
2 2
6 6
7
8
3 3
LIT
LIT LIT
1 1
5 5
5
4
5-27