TOHATSU MFS 25C Quick Reference Manual
Tocs 4.3” lcd display kit
Hide thumbs
Also See for MFS 25C:
- Owner's manual (388 pages) ,
- Service manual (320 pages) ,
- Owner's manual (86 pages)
Table of Contents
Advertisement
TOCS 4.3" LCD Display Kit Quick Reference Guide
＜Applicable Models＞
MFS 25/30C*, MFS 40/50A (013179AE~), MFS60A, MFS75/90/115A
MD 40/50B2 (004743AE~), MD 75/90C2 (011819AE~), MD 115A2 (011828AE~) and BFT models
*
requires 3NV-76133-0, INTERFACE CABLE, for connection between ECU and. ENGINE DROP CABLE.
<Components>
TOCS 4.3" LCD DISPLAY KIT
P/N: S681-K00046101-0
11
1
No.
1
TOCS 4.3" LCD DISPLAY
2
*MOUNTING HARDWARE
3
*BEZEL - 4.3" LCD BLACK
4
*SUN COVER - 4.3" LCD DISPLAY
5
*PIGTAIL CABLE w/ MX150 CONNECTOR
6
* EASY LINK CONNECTING CABLE
7
*DRILLING TEMPLATE
8
*OPERATING INSTRUCTION
9
*INSTALLATION INSTRUCTION
10
ENGINEDROP CABLE =6M
11
TERMINATOR (MALE)
12
TEE CONNECTOR
13
TERMINATOR (FEMALE)
14
BATTERY CABLE
15
BACKBONE CABLE =5M
2
3
4
12
13
Description
5
6
14
21-025 US
Part Number
Q'ty
S681-B00046101
S681-A2C1083230001
S681-B00046301
S681-A2C59500139
3KY-76131-0
3KY-76153-0
3KY-76151-0
3KY-76152-0
3KY-76120-0
3KY-76132-0
10
15
1
1
1
1
1
1
1
1
1
1
1
3
1
1
1
Advertisement
Table of Contents
Related Manuals for TOHATSU MFS 25C
Summary of Contents for TOHATSU MFS 25C
- Page 1 21-025 US TOCS 4.3” LCD Display Kit Quick Reference Guide ＜Applicable Models＞ MFS 25/30C*, MFS 40/50A (013179AE~), MFS60A, MFS75/90/115A MD 40/50B2 (004743AE~), MD 75/90C2 (011819AE~), MD 115A2 (011828AE~) and BFT models requires 3NV-76133-0, INTERFACE CABLE, for connection between ECU and. ENGINE DROP CABLE. <Components>...
- Page 2 21-025 US ＜General Safety Information＞ Please read this manual and follow its instructions carefully. The following safety symbols and signal words are used throughout the manual to alert you to possible hazardous situations. CAUTION Failure to observe could result in personal injury or property damage. Indicates special information to make maintenance easier or instructions clear.
- Page 3 21-025 US ＜Engine Data Availability＞ MFS models *NMEA2000 Trim signal available on MFS 75-115A with use the trim sensor digital. ** Engine coolant temperature: MFS 25/30C Coolant passage wall temperature: MFS 40-60A and MFS 75-115A...
- Page 4 21-025 US BFT models *Boost pressure: Manifold air pressure...
- Page 5 21-025 US ＜Digital Trim Sensor Setting＞ TOCS 4.3” LCD Display has been set the analog trim sensor as default setting. Trim sensor setting requires to OFF manually on the display on all BFT models, and MFS 75-115A models that digital trim sensor is installed. 1．...
- Page 6 21-025 US ＜Fuel Tank Sensor Setting＞ TOCS 4.3” LCD Display has been set up 3-180 Ohm sensor as default setting. Fuel sensor setting requires manually on the display when other type of fuel level sensor is installed. 2． Select SENSOR CONFIG. Press ”ENTER”.
- Page 7 21-025 US 5. Select “Calibration”. 6. Select “Sensor Type”. Press “ENTER”. 7. Select desire sensor type. Press “ENTER”. 8. Beck to the menu with press “MENU BACK”.
- Page 8 21-025 US ＜Reset Total Fuel Consumption＞ TOCS4.3” LCD Display records total fuel consumption. It can be reset by following procedure. 1. Select “SYSTEM CONFIG”. Press “ENTER”. Select “Reset” Press “ENTER” 3. Select “Reset Total Fuel Press “ENTER” 4. Select “YES”, Press “ENTER”.
- Page 9 21-025 US ＜Gateway＞ If sharing and displaying the analog signal data on two or more TOCS4,3LCD displays and/or other NMEA2000 devices. CAUTION The gateway function of analog trim signals cannot be used for MFS and MD models. Do not turn on the gateway function. Otherwise, the engine instance number may not be displayed properly.
- Page 10 21-025 US 4. Select On. Press ENTER button.
- Page 11 21-025 US ＜Wiring Diagram＞ Analog Trim Sensor (Standard) Parts Display Lead Wire Color Code Code Color Function Parts Black Ground Description Yellow +12V key ON ① REMOTE CONTROL HEAD ASSY. (RC12F) Gray Trim signal ② TOCS 4.3" LCD DYSPLAY +12V always ON ③...
- Page 12 21-025 US Digital Trim Sensor (Option) Parts Display Lead Wire Color Code Description Code Color Function ① REMOTE CONTROL HEAD ASSY. (RC12F) Black Ground ② TOCS 4.3" LCD DYSPLAY Yellow +12V key ON ③ METER LEAD WIRE L=2000 (6.5’) +12V always ON ④...
- Page 13 21-025 US BFT 60-150 & 200-250D Mechanical Models Display Lead Wire Color Code Parts Description Code Color Function ① SIDEREMOTE CONTROL BOX ASSY Black Ground ② METER LEAD WIRE Yellow +12V key ON ③ TOCS 4.3" LCD DYSPLAY +12V always ON ④...
- Page 14 21-025 US BFT 200-250D DBW Display Lead Wire Color Code Parts Code Color Function Description Black Ground ① BOX KIT, R/C(TOP/S) (MAIN) Yellow +12V key ON ② TOCS 4.3" LCD DYSPLAY +12V always ON ③ CABLE ASSY, DBW TRUNK Brown Fuel Gauge signal ④...