Pre-Delivery Inspection; Steering Handle; Gear Shift; Engine Oil - TOHATSU MFS 4 Service Manual

Service Information

4. Pre-delivery Inspection

1) Steering Handle

å Check installations for clattering and play.
∫ Adjust steering friction.
ç Check throttle grip for movement. (full open/full close).
∂ Adjust throttle friction.

2) Gear Shift

Check shift lever 1 and propeller shaft for smooth
1.
movement of the shift between forward (F) and neutral (N)
while engine is operating.

3) Engine Oil

1. Set outboard motor straight ahead and vertical.
2. Fill with Engine Oil.
4 Stroke Engine Oil :
OIL
450cm (15.2 fl.oz)
3
Use oil level gauge 1 to check oil quantity.
3.
Engine oil is removed before shipment to
prevent leakage during transportation.

4) Gear Oil

1. Check quantity of gear oil.
Gear Oil :
OIL
195 cm 3
Spill of some oil from upper plug hole as plug is
removed indicates that gear case is filled with
specified quantity of gear oil.
1-8
CAUTION
(6.6 fl.oz)
å
ç
a b
1 Steering Adjust Screw
N N
R R
1
1
1 Oil Level Gauge
4st
4st OIL
1 Oil Plug 2 Gasket
Do not reuse.
∫
c
1
d
∂
c
d
c Lighter d Heavier
F F
2 1
4st 4/5/6 2011