Table of Contents
Advertisement
Download PLC Program is selected.
Source:
Select the external memory where the PLC program (ZLD Project File) to be transferred is stored:
SD Memory Card
Location: Specify the location of the ZLD Project File(.zld). The maximum number is 247 characters.
Destination: Specify the destination PLC connected to the MICRO/I. The PLC type is configured in the Project
Settings dialog box, on the Communication Driver Network tab. For details, refer to Chapter 4
"3.4 Communication Driver Network Tab" on page 4-52.
Interface:
If serial interface is selected for Interface.
Slave Number:
External Device Name:
If Ethernet is selected for Interface.
Select from the following method:
Specify External Device ID: Specify the External Device ID (0 to 31) of the destination PLC. This is the
External Device Name:
Specify IP Address:
*1 HG5G/4G/3G/2G-V, HG4G/3G, HG2G-5F only
*2 HG5G/4G/3G/2G-V, HG4G/3G, HG2G-5F/-5T, HG1G/1P only
*3 HG2J-7U only
*1
, USB Flash Drive
Only alphanumeric characters and symbols can be used. Path delimiters and characters that
cannot be used vary based on the model.
Model
HG2J-7U
HG5G/4G/3G/2G-V, HG4G/3G, HG2G-5F/-5T, HG1G/1P
Example: To set "LDR_PROGRAM.ZLD", a ZLD Project File, to be saved in folder "LDRDATA"
of an external memory device:
HG2J-7U:
LDRDATA/LDR_PROGRAM.ZLD
HG5G/4G/3G/2G-V, HG4G/3G, HG2G-5F/-5T, HG1G/1P:
Select the communication interface in which the MICRO/I is connecting to the
download destination PLC from serial interface or Ethernet. For details, refer to
Chapter 4 "Interface Configuration" on page 4-35.
Specify the slave number of the download destination PLC (0 to 31).
The name of the specified PLC is displayed here.
External Device ID number set in the Project Settings dialog box, on
the Communication Driver Network tab.
The name of the specified PLC is displayed here.
Specify the IP address and port number of the destination PLC.
WindO/I-NV4 User's Manual
*2
*3
*3
, USB1
or USB2
.
Delimiter
/
\
5 Key Button
Characters that cannot be used
" # $ & ' ( ) * : ; < > ? \ ` | ~
" * : ; < > ? |
LDRDATA\LDR_PROGRAM.ZLD
8-79
8
Advertisement
Table of Contents
