IDEC WindO/I-NV4 User Manual page 540

6 Multi-Button
■ Goto Screen
Screen Number: If Action Mode is set to Switch to Base Screen, specify the Base Screen number to switch to
(from 1 to 3000). If Action Mode is set to Open Popup Screen or Close Popup Screen, specify
the number of the Popup Screen to open or close (from 1 to 3015).
This setting is enabled only if Action Mode is set to Switch to Base Screen, Open Popup
Screen, or Close Popup Screen.
Use Reference Device Address
Coordinates X, Y: Specify the coordinates on the Base Screen for displaying a window.
X and Y specify the upper left corner of the window using the upper left corner of the screen as the
origin.
This setting is enabled only if Action Mode is set to Open Popup Screen, Open Device
Monitor Screen, Open Password Screen, Open Adjust Brightness Screen, or Open File
Screen for Movie Files
Use Reference Device Address
*1 Advanced mode only
*2 This is applicable for models with a video interface only.
8-120
*1
: Select this check box and specify a device address to specify the
screen number using the value of the specified device address.
Click to display the Tag Editor. For the device address
configuration procedure, refer to Chapter 2 "5.1 Device Address
Settings" on page 2-70.
This setting is enabled only if Action Mode is set to Open
Popup Screen or Close Popup Screen.
*2
.
*1
: Select this check box and specify a device address to specify the
coordinates using the value of the specified device address.
Click to display the Tag Editor. For the device address
configuration procedure, refer to Chapter 2 "5.1 Device Address
Settings" on page 2-70.
This setting is enabled only if Action Mode is set to Open
Popup Screen.
WindO/I-NV4 User's Manual