Table of Contents
Advertisement
5 User Communication
Constant (Hexadecimal)
The hexadecimal data is sent without being converted.
Use this setting to send a control code of ASCII data (00h to 1Fh).
This can be configured only when TXD or Inching is selected as Type on the Command Settings dialog box, and
Constant (Hexadecimal) is selected under Type on the Data Settings dialog box.
■
Data
Enter hexadecimal data to be transmitted (1 to 1,500 bytes).
Example: Constant (Hexadecimal) for transmission command data
Item
Data
When the trigger condition is satisfied, 1234h is transmitted in the order 12h and 34h.
Data
1234h
No
conversion
3-50
1234
Transmission data
12h
34h
Order of transmission
WindO/I-NV4 User's Manual
Setting
Advertisement
Table of Contents
