IDEC WindO/I-NV4 User Manual page 794

8 Alarm Log Display
Options Tab
●
The Options tab is displayed in Advanced mode.
■ Reference Screen Settings
The Options tab is used to configure the reference screen. The reference screen is a base screen or popup screen
associated with each individual message. The reference screen is displayed when the key button Ref. is pressed.
1. Select a message displayed
on the Alarm Log Display
Occurrence
12/01 09 : 15
12/01 10 : 02
12/01 10 : 28
12/01 13 : 02
Select
Key buttons Up and Dwn
Reference Screen:
Coordinates X, Y:
If you overlap the reference screen key button and the move focus key buttons, the reference screen can be
switched and checked while moving the focus.
10-166
2. Press the key button Ref.
Message Recovered Confirmed
Motor fault
Pump1 fault 12 : 50
High pressure 12 : 54
Pump1 fault
Up Down Delete Reference
Displays the type of screen selected in Reference Screen on the Channel tab in the Alarm
Log Settings dialog box.
to display the Alarm Log Settings dialog box.
Click
When displaying a reference screen, select either Base Screen or Popup Screen as the
reference screen type.
When not displaying a reference, select Not Use.
Specifies the coordinates to display the reference screen.
With the upper-left corner of the screen as the origin, the X and Y coordinates are the upper-left
corner of the reference screen.
This option can only be configured when Base Screen or Popup Screen is selected for
Reference Screen.
Specify the coordinates in 1 dot units.
X: 0 to (base screen horizontal size - 1)
Y: 0 to (base screen vertical size - 1)
WindO/I-NV4 User's Manual
Occurrence Message Recovered Confirmed
12/01 09 : 15 Motor fault
12/01 10 : 02 Pump1 fault 12 : 50
12/01 10 : 28 High pressure 12 : 54
12/01 13 : 02 Pump1 fault
Select Up Down Delete Reference
Key button Ref.
Reference screen opens
Pump 1 fault
Pump 1 output low
Occurrence Message Recovered Confirmed
12/01 09 : 15 Motor fault
12/01 10 : 02 Press Stop, check the air, Pump1 fault 12 : 50
12/01 10 : 28 High pressure 12 : 54
then press Start.
12/01 13 : 02 Pump1 fault
Air Press.
Select Up Down Delete Reference
0000
Stop Start
kg/m 2
Reference screen