IDEC WindO/I-NV4 User Manual page 94

4 Customizing WindO/I-NV4
General Tab
●
■ Editing
Enable Increment Address Number:
Enable Text Auto Resizing:
Enable Input Method Editor (IME) when entering Device Address: Select this box to enter characters other than
You cannot enter full-width characters in text boxes that only accept alphanumeric input, even if the IME is
enabled.
Select this box to use full-width characters in tag names in the device address settings.
■ Bit Number Symbol
Select the separator for address numbers and bit numbers. When manually entering device address, you can enter
either separator, but they will be displayed using the symbol selected here.
Dot (WindLDR Format):
Dash (WindO/I-NV4 Format):
■ Workspace
Workspace Setup:
*1 For the following external devices, this feature cannot be used because the device address format is different.
- The Manufacturer is ABB or Emerson
- The Manufacturer is Allen-Bradley and the Communication Driver is Logix Native Tag(Ethernet)
2-62
*1
Separates the address number and bit number with a dot.
Example: D100.00
Separates the address number and bit number with a dash.
Example: D100-0
Displays the Workspace Setup dialog box. You can configure items displayed in
the workspace window. For details, refer to "4.2 Customizing the Workspace"
on page 2-69
WindO/I-NV4 User's Manual
When copying or duplicating parts, select this
check box to add a specified value (-999 to 999)
to address number of the device address set for
the original part before pasting it to the screen.
Select this box to automatically change the text
size according to a change in part size.
alphanumeric characters using the input method
editor (IME) in text boxes for entering device
addresses.