Table of Contents
Advertisement
5 User Communication
Add Protocol:
Adds a user communication protocol to the (Protocol List).
Copies the selected user communication protocol in the (Protocol List).
Copy Protocol:
Click this button to add a copy of the selected user communication protocol to the end of the
(Protocol List).
Import:
Imports a saved user communication protocol file. Click this button to display the Open dialog box.
For details, refer to "Importing user communication protocol" on page 3-31.
Export and saves a user communication protocol selected in the (Protocol List) as a file.
Export:
Click this button to display the Save As dialog box. For details, refer to "Saving registered user
communication protocol as a file" on page 3-30.
Saved user communication protocols can be imported using Import.
Delete Protocol: Deletes a user communication protocol selected in the (Protocol List).
■
Command List
The command settings for the user communication protocol selected in the (Protocol List) are displayed.
*1
(Type)
:
Changes the items displayed in the list according to the type of command.
TXD, RXD:
Inching:
User communication protocol commands are displayed in the order they were created, but commands for
inching function are always displayed above the transmission and receive commands in the list.
No.:
Shows the number for managing command settings. Double clicking the cell displays the Command
Settings dialog box.
Type:
Shows the type of command. Double clicking the cell displays the Command Settings dialog box.
Key:
Shows the function keys (F1 to F12) assigned to the command. Double clicking the cell displays the
Command Settings dialog box.
This option is displayed only when the Inching check box is selected.
Trigger Type:
Shows the trigger type for data transmission or being ready to receive data. Double clicking the cell
displays the Command Settings dialog box.
Condition:
Shows the condition of trigger type for data transmission or being ready to receive data. Double
clicking the cell displays the Command Settings dialog box. The displayed content varies based on
Trigger Type.
Always Enabled:
Rising-edge, Falling-edge, While ON, or While OFF:
While satisfying the condition or Satisfy the condition:
Fixed Period:
Completed:
Shows the device address for reporting when transmission or receiving of data is successfully
completed. Double clicking the cell displays the Command Settings dialog box.
Status:
Shows the destination device address for the transmitted or received data size and error
information. Double clicking the cell displays the Command Settings dialog box.
Comment:
Shows the command comment. Double clicking the cell displays the Command Settings dialog box.
Size:
Shows the command data size in bytes. The maximum is displayed if there is data that has the
Variable check box selected on the Data Settings dialog box. Double clicking the cell displays the
Command Settings dialog box.
*1 HG1P only
3-34
Select this check box to display transmission and receive commands.
Select this check box to display commands for the inching function.
Trigger conditions are not necessary, so nothing is displayed.
Shows the bit device or the bit of the word device as the condition.
Shows the conditional expression.
Shows the period.
WindO/I-NV4 User's Manual
Advertisement
Table of Contents
