IDEC WindO/I-NV4 User Manual page 790

8 Alarm Log Display
■ (Color setting list by level and status)
Configures the text color, the background color and whether or not to flash according to the alarm level and status.
Level:
Show:
Occurred, Recovered, Confirmed: Edit the settings for text color, background color, and flashing according to the
When the Key Button CHECK is pressed before recovering a triggered alarm, the alarm display will change
from the Occurred Color to the Confirmed Color. After this, the alarm that has changed to the Confirmed
Color will remain in that color and will not change to the Recovered Color even when recovered.
■ Edit
Changes the settings for the selected level.
Select the line and click this button to display the Edit dialog box.
For details, refer to "Edit Dialog Box" on page 10-165.
■ Change Display Colors of First Alarm
Select this check box to change the color of the First Alarm.
Text Color: Selects the text color of First Alarm (color: 256 colors, monochrome: 16 shades).
Click Color to display the Color Palette. Select a color from the Color Palette.
Background Color:Selects the background color of First Alarm (color: 256 colors, monochrome: 16 shades).
Click Color to display the Color Palette. Select a color from the Color Palette.
Flash: Selects whether or not to flash First Alarm. Double clicking the cell toggles between Y as Yes and N
as No.
Flash intervals are set in the Flashing Cycle on the System tab in the Project Settings dialog box.
10-162
Displays the level of alarms.
Select the check boxes for the Level displayed on the Alarm Log Display.
status of alarm occurrence, recovery, and confirmation.
Text Color: Selects the text color of alarms (color: 256 colors,
monochrome: 16 shades).
Click Color to display the Color Palette. Select a color from the
Color Palette.
Background Color:Selects the background color of alarms (color: 256 colors,
monochrome: 16 shades).
Click Color to display the Color Palette. Select a color from the
Color Palette.
Flash: Selects whether or not to flash alarms. Double clicking the cell
toggles between Y as Yes and N as No.
Flash intervals are set in the Flashing Cycle on the System
tab in the Project Settings dialog box.
WindO/I-NV4 User's Manual