Drawings And Parts Overlapping; Overview - IDEC WindO/I-NV4 User Manual

4

Drawings and Parts Overlapping

This section describes when drawing and parts overlap.

4.1 Overview

Place the drawings and parts on the top layer to have precedence when these objects overlap on base screens and
popup screens.
Configure the Properties dialog box of the drawings or parts if they need to be placed on the top layer. For details,
refer to the settings for the drawings or part.
Select behind objects
To select an object that is under other objects, press and hold CTRL while you click the stacked objects. To
select an object that is the front of the stacks, press and hold CTRL while you click the selected object that
is the back.
HG2J-7U HG5G-V HG4G-V
130
100
120
Top Layer
Base Screen or Popup Screen
WindO/I-NV4 User's Manual
4 Drawings and Parts Overlapping
HG4G HG3G-V HG3G HG2G-V HG2G-5F
Display for Base Screen or Popup Screen
130
100
120
HG2G-5T HG1G HG1P
6
6-5