IDEC WindO/I-NV4 User Manual page 895

Trigger Condition Tab
●
The Trigger Condition tab is displayed in Advanced mode.
The line chart is enabled while the condition is satisfied, and it is disabled while the condition is not satisfied. When
disabled, the plate and flange are displayed, but the chart is not displayed.
Example: When Trigger Type is While ON and Device Address is LM0
While LM0 is 0, the condition is not satisfied and the line chart is not displayed.
While LM0 is 1, the condition is satisfied and the line chart is displayed.
■ Trigger Type
Selects the condition to enable the line chart from the following.
Always visible: The line chart is always enabled.
Chart state
LM0 :
0
Condi on
Not
sa sfied
LM0 :
1
Condi on
Sa sfied
WindO/I-NV4 User's Manual
MICRO/I
Hide chart
100
80
60
40
20
0
-20
Show chart
100
80
60
40
20
0
-20
100
80
60
40
20
0
-20
Always show chart
2 Line Chart
11
11-47