Table of Contents
Advertisement
7 Timer
■
Data Type
Selects the data type to be handled by the condition formula.
Can only be set if While satisfying the condition is selected as Trigger Type.
For details, refer to Chapter 2 "1.1 Available Data" on page 2-1.
■
Device Address
Specifies the bit device or the bit number of the word device to serve as condition.
Can only be set if While ON or While OFF is selected as Trigger Type.
Click
to display the Tag Editor. For the device address configuration procedure, refer to Chapter 2 "5.1 Device
Address Settings" on page 2-70.
■
Condition
Specifies the conditional expression.
This option can only be configured when While satisfying the condition is selected for Trigger Type.
to display the Trigger Condition Settings dialog box. For the conditional expression configuration
Click
procedure, refer to Chapter 2 "5.2 Setting Conditional Expressions" on page 2-73.
■
Comment
Used for entering comments about trigger conditions. The maximum number is 80 characters.
12-64
WindO/I-NV4 User's Manual
Advertisement
Table of Contents
