Table of Contents
Advertisement
Destination: Displays a download destination of the project.
Clear Keep Devices:
When project data is downloaded, the alarm log data, data log data, and operation log data is deleted
regardless of the state of the Clear Keep Devices check box.
Starts running without displaying the Result window:
Upload Project is selected.
Destination: Specify where to save the project uploaded from MICRO/I. Select the location:
SD Memory Card
Location: Specify the location where the uploaded project will be saved. The maximum number is 247
A uploaded project using the Data Transfer function is saved as a ZNV Project File(.znv).
*1 HG5G/4G/3G/2G-V, HG4G/3G, HG2G-5F only
*2 HG5G/4G/3G/2G-V, HG4G/3G, HG2G-5F/-5T, HG1G/1P only
*3 HG2J-7U only
Select this check box to clear keep devices after the project data is downloaded. However,
when project data that changes the system software or settings of the data storage area is
downloaded, the keep devices are always cleared.
Select this check box to start running MICRO/I without displaying the execution result
screen after the project data is downloaded.
*1
, USB Flash Drive
characters. Only alphanumeric characters and symbols can be used. Path delimiters and
characters that cannot be used vary based on the model.
Model
HG2J-7U
HG5G/4G/3G/2G-V, HG4G/3G, HG2G-5F/-5T, HG1G/1P
Example: To save project to the folder "Uploaded_Project" in an external memory device:
Uploaded_Project
WindO/I-NV4 User's Manual
*2
*3
*3
, USB1
or USB2
.
Delimiter
/
\
5 Key Button
Characters that cannot be used
" # $ & ' ( ) * : ; < > ? \ ` | ~
" * : ; < > ? |
8-77
8
Advertisement
Table of Contents
