IDEC WindO/I-NV4 User Manual page 611

• Display a picture when in the OFF state.
External device
bit3 bit0
D0= 0100
bit3 bit0
D0= 0001
bit3 bit0
D0= 0010
bit3 bit0
D0= 0000
The conditions to display the picture set by the OFF state on the screen are as follows.
• Y is selected under Flash on the State tab and the trigger condition is not satisfied.
• Switching Method on the General tab is Bit Number, and the all bit in the device address are 0 or a
bit not allocated a picture is 1.
• Switching Method on the General tab is Value, and the value of device address is a number not
allocated a picture.
MICRO/I
WindO/I-NV4 User's Manual
2 Multi-State Lamp
bit15 bit3 bit0
D0
State: State: State:
2 1 0 OFF
9
9-17