Table of Contents
Advertisement
Data Over Tab
●
The Data Over tab is displayed in Advanced mode.
■
Range
Select data type.
Value:
Specifies the minimum and/or the maximum as a constant.
Device Address:
Specifies the minimum and/or the maximum as a word device value.
Specifies the allowable range of values to display.
Minimum, Maximum:
Select these check boxes to specify the minimum and/or maximum.
The minimum and maximum that can be specified when Value is selected vary based on the
data type selected with Data Format on the General tab. For details on data types, refer to
Chapter 2 "1.1 Available Data" on page 2-1.
When Device Address is selected, these options specify the source word devices.
Click
Chapter 2 "5.1 Device Address Settings" on page 2-70.
to display the Tag Editor. For the device address configuration procedure, refer to
WindO/I-NV4 User's Manual
1 Bar Chart
11
11-9
Advertisement
Table of Contents
