Table of Contents
Advertisement
Momentary: Pressing the button writes a 1 to the bit device.
Releasing the button writes a 0 to the bit device.
Operation and
view
Action
Data written
Pressing and holding the button until the screen changes causes a 0 to be written to the bit device.
Alternate:
Each press of the button alternately writes a 1 or 0 to the bit device.
Operation and
view
Action
Data written
Toggle:
Pressing the button inverts the value of the bit device.
If the value of the bit device is 0 it changes to 1, and vice versa.
Operation and
view
Action
Move:
Pressing the button writes the value in the source bit device to the value in the destination bit device.
Operation and
view
Action
■
Destination Device Address
Specify the destination bit device.
Click
to display the Tag Editor. For the device address configuration procedure, refer to Chapter 2 "5.1 Device
Address Settings" on page 2-70.
Press
Release
Initial image
Write
Write
1
Press
Release
Initial image
Write
1
Press
Release
Initial image
Toggle
Press
Release
Initial image
Move
WindO/I-NV4 User's Manual
Press
Release
Write
Write
0
1
0
Press
Release
Write
0
Press
Release
Toggle
Press
Release
Move
1 Bit Button
8
8-5
Advertisement
Table of Contents
