IDEC WindO/I-NV4 User Manual page 538

6 Multi-Button
■ Source Data
Select the data handled by the operation selected for Action Mode.
Value: Use a constant value.
Only a Value can be handled if Action Mode is set to Set or Set ON & OFF Data.
If Action Mode is set to Set ON & OFF Data, the value in the ON Data is written when the
button is ON, and the value in the OFF Data is written when the button is OFF.
Hexadecimal:
Device Address: Use a value of device address.
Specify the device.
Click
2 "5.1 Device Address Settings" on page 2-70.
Use Reference Device Address
Transfer
■ Destination Device Address
Destination Device Address:
Use Reference Device Address
*1
Write :
*1 Advanced mode only
8-118
Select this check box to enter the ON Data and OFF Data
values in hexadecimal.
to display the Tag Editor. For the device address configuration procedure, refer to Chapter
*1
: Select this check box and specify a device address to change the
source word device according to the value of the specified device
address.
This setting is enabled only if Action Mode is set to Move.
For details, refer to Chapter 2 "Indirect Read and Indirect Write
Settings" on page 2-5.
*1
:
Specify the number of word devices (1 to 64) to transfer.
This setting is enabled only if Action Mode is set to Move.
For details, refer to "Transfer
Specify the destination word device.
Click to display the Tag Editor. For the device address configuration procedure,
refer to Chapter 2 "5.1 Device Address Settings" on page 2-70.
*1
: Select this check box and specify a device address to change the destination word
device according to the value of the specified device address.
This setting is enabled only if Action Mode is set to Move.
For details, refer to Chapter 2 "Indirect Read and Indirect Write Settings" on page
2-5.
Specify the number of word devices (1 to 64) at the destination.
For Move, specify how many times to write.
This setting is enabled only if Action Mode is set to Set, Move, or Set ON & OFF
Data.
For details, refer to "Write
WindO/I-NV4 User's Manual
*1
" on page 8-25.
*1
" on page 8-26.